www.skonetech.com

 

 

 

 << Return

  

Seat Belt Tension Adjuster

Buckle-up and Breathe Easy

If you have been frustrated by tight seat belts that wrinkle your suits, cause driving discomfort, or constrict you around the neck, try Seat Belt Tension Adjuster. It is an innovative product that allows you to drive in comfort while you buckle-up for safety.

Seat Belt Tension Adjuster is attached to the top third of the seat belt and allows the driver to slacken the seat belt from a half inch to an inch. It does not interfere with the seat belt's function during an accident as seat belts respond to gravity pull, which supercedes the small amount of slack.

  • Easy to use!

  • Provides additional slack for your driving comfort.

  • Prevents wrinkling of clothing from your seat belt.

  • Allows seat belt to operate normally.

  • Suitable for the whole family.

  • Great for long trips.

  • Adjustable for all individuals.

  • Fits on standard and automatic seat belts

  • Keeps within National Highway Traffic Safety Administration slack guidelines for seat belts. 

 

Instructions

__________________________________________________________________________________________

  

After buckling your seat belt

1.Detach the top of the adjuster from the bottom by holding both pieces and sliding them in opposite directions.
2.Position adjuster on belt strap, with the red lock and flap facing you. Snap back together as they were originally.
3.Slide adjuster towards the seat belt retractor, and pull the strap, allowing enough slack for your comfort. Allowing for a maximum of 1/2: to 1: of slack is recommended for comfort. Lock into position by sliding red lock to the right; unlock to left to readjust.

   

  

Warning
     
  The purpose of wearing SB-SLIP Seat Belt Tension Adjuster is only to provide comfort, not to compromise the effectiveness of your seat belt. For maximum safety, you should keep the fit of your seat belt and shoulder harness as saft as possible. Allowing for a maximum of a half inch to an inch of slack is recommended for comfort. DO NOT adjust the SB-SLIP to allow for more than the recommended amount of slack since doing so will compromise the effectiveness of your shoulder harness and may cause the wearer to move forward and forcibly strike the steering wheel or dashboard in the event of a collision. 

        
  

 Email: sale@skonetech.net

Skone Electric Appliance Co.,ltd